Epoxy Flooring in Mesquite, TX
Looking for professional epoxy flooring in Mesquite, TX? EPOXY Flooring by NovaRiver LLC builds floors for garages that actually get used — where the tools come out on weekends, the car goes up on jack stands, and the workbench earns its keep.
This isn't a floor you tiptoe around. It takes dropped wrenches, rolling jacks, oil, and grease, and cleans up with a broom and a mop. Every job starts with diamond-grind prep and a 100%-solids epoxy system under a UV-stable polyaspartic topcoat. 10-year warranty.
✓ Built for Real Work
✓ Tool & Oil Proof
✓ 10-Year Warranty
✓ Diamond-Grind Prep
Made for the Way You Use the Garage
A weekend workshop takes abuse a parking-only garage never sees. This floor is spec'd for the harder job.
Takes the Tools
Dropped sockets, a sliding creeper, jack stands and an engine hoist — the floor shrugs off the impacts and point loads that chip and gouge bare concrete.
Oil & Grease Wipe Off
Bare concrete soaks up every oil change and keeps the stain for good. A sealed epoxy floor holds it on the surface — wipe it up whenever, nothing left behind.
Handles the Chemicals
Brake cleaner, coolant, battery acid, solvents — the everyday chemistry of working on a vehicle. It resists what would eat into raw concrete.
Easier to See In
A light epoxy floor bounces the overhead light around the whole garage. Real difference when you're under a car or reading fine print on a part.
Sweeps Clean
Metal shavings, sawdust, spilled hardware — it all sweeps off a seamless surface instead of grinding into porous concrete. End the day with a quick pass.
Outlasts the Projects
10–20 years on a diamond-ground slab. This floor will still be going strong long after the current project in the bay is finished and sold. Backed by our 10-year warranty.
Epoxy Systems We Install in Mesquite
Three professional systems on 100%-solids epoxy. For a working garage, flake is almost always the right call — but the choice is yours.
- Flake Epoxy — full-broadcast vinyl flake, granite look, slip-resistant and forgiving of dirt and wear. The workhorse floor, and the top pick for a Mesquite workshop.
- Stone Epoxy — decorative quartz aggregate, natural stone texture and real traction. The choice for a patio or covered outdoor work area.
- Metallic Epoxy — swirling pigments in clear epoxy, high-gloss and one of a kind. When the garage is a showpiece as much as a shop.
Our Epoxy Flooring Installation Process in Mesquite
Step 1: Free Estimate
We come out, measure, look at the concrete, and talk through how hard the garage works. Straight written quote, no runaround.
Step 2: Diamond Grinding
Industrial grinders strip old oil-soaked surface and profile the concrete. Included every job — the step that makes it bond. More on our grinding.
Step 3: Crack & Spall Repair
Every crack, divot, and gouge from years of use filled and leveled before the coating goes down.
Step 4: Base Coat
100%-solids epoxy on the prepped surface. No thin water-based fillers — this is the layer doing the heavy lifting.
Step 5: Flake / Stone / Metallic
Your chosen material broadcast to full saturation — with anti-slip aggregate available for a shop that sees spills.
Step 6: Polyaspartic Topcoat
UV-stable topcoat seals and armors the floor. Walk on it in 24 hours, drive on it in 48.
On an Oil-Stained Shop Floor, the Grind Is Everything
A working garage floor is usually soaked with years of oil and grease — and a coating won't stick to a greasy slab, no matter what. That's why we diamond grind every floor, never acid etch. Grinding cuts away the contaminated top layer and profiles clean concrete underneath, so the epoxy bonds to sound material and stays put through everything you throw at it. Skip that and a fresh coating peels off the grease in months. Grinding is also available as a standalone service from $350.
Learn About Concrete Grinding
Standalone service from $350
Serving Mesquite & All of DFW
We cover all of Mesquite — the neighborhoods around Town East, Creek Crossing, the areas near the rodeo and along US-80, and out toward Sunnyvale. Mesquite sits in eastern Dallas County, and we work the whole area: Garland, Balch Springs, Forney, Sunnyvale — and west into Dallas. No travel fees across our service area.
Allen
Anna
Arlington
Aubrey
Carrollton
Celina
Dallas
Denton
Flower Mound
Fort Worth
Frisco
Garland
Grand Prairie
Grapevine
Irving
Keller
Lewisville
Little Elm
McKinney
Melissa
Mesquite
Oak Point
Plano
Prosper
Richardson
Roanoke
Wylie
Why Choose EPOXY Flooring by NovaRiver LLC in Mesquite?
- Built for working garages — spec'd for tools, jacks, oil, and real use.
- Our own crew every time — no subcontractors, same team start to finish.
- Honest, straight pricing — a fair number for a floor that outlasts everything on it.
- 100%-solids epoxy only — no water-based systems that fail in Texas heat.
- Diamond grinding included — strips old oil so the coating bonds to clean concrete.
- Locally owned & operated — based in DFW, not a national franchise.
- 10-year warranty — if your floor fails, we fix it. Period.
FAQ — Epoxy Flooring Mesquite TX
Common questions from Mesquite homeowners with garages that pull real duty.
Yes. This is exactly what it's built for. A 100%-solids epoxy floor under a polyaspartic topcoat takes dropped tools, rolling jacks and jack stands, engine hoists, and a workbench that gets used hard. It resists the oil, solvent, and grease a working garage produces, and it doesn't chip or gouge the way bare concrete does when something heavy lands on it.
Most Mesquite garage floors range from $3 to $7 per sq ft installed. A standard 2-car garage runs $1,400–$2,800 depending on the system and the condition of the concrete. It's a straightforward, honest price for a floor that outlasts everything you'll put on it. Free on-site estimates, no obligation.
Yes, and it's routine. A working garage floor with old oil, grease, and stains is a normal starting point. We diamond grind the slab back to clean concrete — which removes the oil-soaked surface layer — then fill the cracks and coat it. The floor you end up with looks nothing like what we started with.
Less than you'd think. The flake finish has texture built in for grip, and we can add anti-slip aggregate to the topcoat for a shop floor that regularly sees spills. It's far safer underfoot than a smooth painted floor or bare sealed concrete when something gets spilled.
All of Mesquite — the neighborhoods around Town East, Creek Crossing, the areas near the rodeo and along US-80, and out toward Sunnyvale. We also serve neighboring Garland, Balch Springs, Forney, and Dallas. No travel fees within our service area.
Ready to Upgrade Your Mesquite Garage?
Free on-site estimates · Usually available within 48 hours · No obligation
Built for the Work You Do
Tools, jacks, oil, weekend projects — this floor is spec'd for it. Tell us how you use the garage and we'll match the system.
Dallas County Coverage
Mesquite, Garland, Balch Springs, Forney, Sunnyvale — plus the full DFW metroplex, no travel fees.
10-Year Warranty
Every floor we install in Mesquite is backed by our 10-year warranty. If it fails, we fix it — no questions asked.