Flake Epoxy Floor Coating in Dallas–Fort Worth, TX
Flake epoxy coating is our most popular garage floor in DFW — and for good reason. Full-broadcast vinyl flake over 100%-solids epoxy, sealed with a UV-stable polyaspartic topcoat. The result: a granite-look surface that shrugs off hot tires, dropped tools, oil, and Texas heat.
Every job starts with diamond grinding — never acid etching — and is installed by our own crew, start to finish. No subcontractors. Backed by a 10-year warranty.
Decorative vinyl flakes are broadcast into a wet 100%-solids epoxy base coat to full saturation, then locked in under a clear polyaspartic topcoat. You get a multi-layered, textured floor coating that is seamless, slip-resistant, and genuinely tough.
It is the go-to garage floor coating for homes, basements, patios, showrooms, and light commercial space across DFW. Color, flake size, and broadcast density are all customizable — from subtle grey blends to bold statement floors.
Full-broadcast flake — no thin, patchy coverage
100%-solids epoxy base — no water-based fillers
UV-stable polyaspartic topcoat — will not yellow
Naturally slip-resistant texture
Seamless surface — nothing soaks in, nothing hides
Benefits of Flake Epoxy Floor Coating
Built for Texas Heat
The UV-stable polyaspartic topcoat will not yellow, peel, or bubble through DFW summers. Hot tire pickup — the thing that ruins cheap garage coatings — is not an issue here.
10–20+ Year Durability
Resistant to cracks, stains, chemicals, and heavy vehicle traffic. Properly installed flake epoxy coating lasts 10–20 years and beyond — backed by our 10-year warranty.
Slip-Resistant Surface
The textured flake provides natural traction — safe for families and pets even when the floor is wet. Anti-slip additive available on request for pool decks and wet areas.
Fully Customizable
Dozens of flake blends, sizes, and broadcast densities. Subtle modern greys or bold multi-color patterns. Custom decals and logos under the topcoat also available.
Zero-Effort Maintenance
Sweep and occasionally mop — that is it. The seamless surface repels oil, dirt, and liquids. No grout lines, no porous concrete soaking up spills.
Ready in 1 Day
Most DFW garage floors are completed in a single day. Walk on it in 24 hours, drive on it in 48 hours. Minimal disruption to your routine.
Our Flake Epoxy Coating Installation Process
Step 1: Free Estimate
We come out, measure the floor, inspect the concrete, and talk through flake blends and colors. Transparent written quote — no surprises, no pressure.
Step 2: Diamond Grinding
Industrial diamond grinders mechanically profile the concrete. Included on every job, no exceptions — this is what makes the epoxy bond permanently. More on our grinding process.
Step 3: Crack & Spall Repair
Cracks, divots, and damaged areas are filled and repaired before any coating goes down, so the new floor starts on a flawless foundation.
Step 4: Base Coat
A 100%-solids epoxy base coat is rolled onto the prepped surface. No water-based fillers — just high-performance resin engineered for Texas conditions.
Step 5: Flake Broadcast
Vinyl flake is broadcast into the wet base coat to full saturation, then scraped back to a smooth, even profile. Your chosen blend, your chosen density.
Step 6: Polyaspartic Topcoat
A UV-stable polyaspartic topcoat seals and protects the flake. Walk on the floor in 24 hours, drive on it in 48 hours.
Why We Never Skip the Grinding
The number one reason flake epoxy floors fail is bad prep. Acid etching leaves an inconsistent surface and a chemical-only bond — the coating lifts within a year. We diamond grind every floor, opening the concrete pores and creating a uniform CSP so the epoxy locks in mechanically. It is the whole reason we can offer a 10-year warranty. Grinding is also available as a standalone service from $350.
Flake epoxy coating starts at $5 per square foot installed, which includes diamond grinding, crack repair, and installation by our own crew. A standard 2-car garage typically lands between $2,000 and $3,000 depending on concrete condition and flake blend. Free on-site estimates, no obligation.
With a UV-stable polyaspartic topcoat, expect 10–20 years. Our systems are formulated for DFW summers — they will not yellow, peel, or bubble. Every floor carries a 10-year warranty.
No. The full-broadcast flake creates a naturally textured surface with real traction, even wet. For pool decks or high-moisture areas we can add an anti-slip additive to the topcoat on request.
Yes — diamond grinding is included on every single job, no exceptions. We never acid etch. Mechanical profiling is the only way to get a permanent bond, and it is why we can back the floor with a 10-year warranty.
Walk on it in 24 hours, drive on it in 48 hours. Full chemical cure takes 7 days. Most DFW garages are finished in a single day.
Ready for a Flake Epoxy Floor Coating?
Free on-site estimates · Usually available within 48 hours · No obligation
No matter where you are in the Dallas–Fort Worth metroplex, we bring professional epoxy flooring services right to your doorstep. Start with Dallas or text us your city.
10-Year Warranty
Every flake epoxy floor we install is backed by our 10-year warranty. If it fails, we fix it — no questions asked.
1-Day Installation
Most DFW garage floors completed in a single day. Walk on it in 24 hours, drive on it in 48 hours.
