Epoxy Flooring in Garland, TX
Looking for professional epoxy flooring in Garland, TX? EPOXY Flooring by NovaRiver LLC installs flake, stone, and metallic epoxy systems — and we'll tell you what it costs before you have to ask twice.
$3 to $7 per square foot, installed. That's the whole range. Diamond grinding, crack repair, 100%-solids epoxy, and a UV-stable polyaspartic topcoat are all in it — none of them are upcharges. Written quote before we start, and it doesn't move once we're on site. 10-year warranty.
✓ Written Quote Up Front
✓ No Hidden Upcharges
✓ 10-Year Warranty
✓ Diamond-Grind Prep
What It Costs, and What's In It
$3–$7
per square foot, installed
2-car garage — typical
$1,400–$2,800
3-car / oversized
Quoted by sq ft
Grinding only — no coating
From $350
Where you land in the range depends on the size of the floor, the condition of the concrete, and which system you pick. Nothing else.
Included — Not Extra
- Diamond grinding. Every job, no exceptions. This is the single most expensive step and the one cheap quotes leave out.
- Crack & spall repair. We fix what we find. Nobody gets a phone call halfway through the job about "unexpected damage."
- 100%-solids epoxy. Not water-based. The difference is roughly the difference between a floor and a paint job.
- UV-stable polyaspartic topcoat. What stops the yellowing and the hot tire pickup.
- 10-year warranty. If it fails, we come back and fix it.
About Those $150 Kits
The box at the hardware store is not a cheaper version of this. It's a different product.
Most big-box kits are water-based epoxy with an acid etch packet in place of grinding. Acid etching gives you a chemical bond and nothing else — no mechanical key into the concrete. Under a hot Texas tire, that bond gives out. The coating lifts, usually in the exact spot where the car sits, usually within the first year.
So the honest comparison isn't $150 against $2,000. It's a coating that lasts one summer against a floor that lasts fifteen years. If you've already tried the kit and it's peeling, we grind it off and start properly — that's a normal job for us.
Epoxy Systems We Install in Garland
All three sit in the same price range. Which one you pick is about the look, not the budget.
Flake Epoxy
Full-broadcast vinyl flake over 100%-solids epoxy, sealed with polyaspartic. Granite look, slip-resistant, hides dirt and wear. The most popular choice in Garland garages, and the one most people should get.
Stone Epoxy
Decorative quartz aggregate, natural stone texture. Real traction even wet — which is why it's the pick for pool decks, patios, and covered outdoor concrete rather than garages.
Metallic Epoxy
Swirling pigments in clear epoxy, mixed to your palette. Every pour is one of a kind. Costs the same to install — you're paying for a look, not for durability you wouldn't otherwise get.
Our Epoxy Flooring Installation Process in Garland
Step 1: Free Estimate
We come to your Garland property, measure, inspect the concrete, and hand you a written number. That number is the number.
Step 2: Diamond Grinding
Industrial grinders profile the concrete and strip whatever's already on it. Included, never an upcharge. Learn more about our grinding process.
Step 3: Crack & Spall Repair
Cracks and divots filled before any coating goes down. Also included. You don't get a mid-job phone call about it.
Step 4: Base Coat
100%-solids epoxy rolled onto the prepped surface. No water-based fillers — that's the stuff in the box kits, and it's why they fail.
Step 5: Flake / Stone / Metallic
Your chosen material broadcast into the wet base coat to full saturation, then scraped back even.
Step 6: Polyaspartic Topcoat
UV-stable topcoat seals it. Walk on it in 24 hours, drive on it in 48. Most Garland garages are done in a single day.
The Step That Costs the Most and Gets Skipped the Most
If one quote comes in dramatically under another, this is almost always where the money went. Diamond grinding takes hours, needs industrial equipment, and doesn't show up in the finished floor — so it's the easiest thing to quietly leave out. Acid etching costs almost nothing and looks fine on day one. It just doesn't hold. We grind every floor, and that's a real part of why our number is what it is. Grinding is also available on its own from $350 if that's all you need.
Learn About Concrete Grinding
Standalone service from $350
Serving Garland & All of DFW
We cover all of Garland — Firewheel, Duck Creek, the neighborhoods around downtown Garland, and out toward Lake Ray Hubbard. We also work neighboring Rowlett, Sachse, Richardson, and Mesquite, and the full metroplex from Dallas west to Fort Worth. No travel fees across our service area — that isn't a promotion, it's just not something we charge for.
Allen
Anna
Arlington
Aubrey
Carrollton
Celina
Dallas
Denton
Flower Mound
Fort Worth
Frisco
Garland
Grand Prairie
Grapevine
Irving
Keller
Lewisville
Little Elm
McKinney
Melissa
Mesquite
Oak Point
Plano
Prosper
Richardson
Roanoke
Wylie
Why Choose EPOXY Flooring by NovaRiver LLC in Garland?
- The quote is the price — written before we start, unchanged when we finish.
- Our own crew every time — no subcontractors, same team start to finish.
- 100%-solids epoxy only — no water-based systems that fail in Texas heat.
- Diamond grinding included — the expensive step, not an optional add-on.
- Locally owned & operated — based in DFW, not a national franchise with a call center.
- 10-year warranty — if your floor fails, we fix it. Period.
- Residential & commercial — garages, patios, shops, warehouses.
FAQ — Epoxy Flooring Garland TX
Straight answers, including the ones about money.
$3 to $7 per sq ft installed. A standard 2-car garage runs $1,400–$2,800. What moves the number: the size of the floor, the condition of the concrete, and which system you pick. We give you a written quote before we start, and it doesn't change once we're on site.
You can — the problem is what's in the box. Most big-box kits are water-based epoxy with an acid etch packet instead of grinding. Acid etching gives a chemical-only bond, which means the coating lifts within a year, usually right where the tires sit. The kit isn't a cheaper version of what we do. It's a different product with a different lifespan.
Diamond grinding, crack and spall repair, 100%-solids epoxy base coat, your chosen flake or quartz or metallic broadcast to full saturation, and a UV-stable polyaspartic topcoat. Plus the 10-year warranty. No line-item surprises — grinding isn't an upcharge, and neither is fixing the cracks we find.
10–20 years with a UV-stable polyaspartic topcoat. Spread the cost of a 2-car garage across even ten years and it's under $25 a month for a floor that doesn't stain, doesn't dust, and doesn't need redoing. That's the math worth doing.
All of Garland — Firewheel, Duck Creek, the neighborhoods around downtown Garland, and out toward Lake Ray Hubbard. We also serve neighboring Rowlett, Sachse, Richardson, and Mesquite. No travel fees within our service area.
Want a Real Number for Your Garland Garage?
Free on-site estimate · Written quote · No obligation, no sales pitch
The Quote Is the Price
Written up front. Grinding and crack repair are in it. Nobody calls you halfway through the job with a revised total.
Dallas County Coverage
Garland, Rowlett, Sachse, Richardson, Mesquite — plus the full DFW metroplex, with no travel fees.
10-Year Warranty
Every floor we install in Garland is backed by our 10-year warranty. If it fails, we fix it — no questions asked.