Epoxy Flooring in Fort Worth, TX
Looking for professional epoxy flooring in Fort Worth, TX? EPOXY Flooring by NovaRiver LLC installs industrial and residential epoxy systems across Fort Worth — warehouse floors, shop and service bays, commercial spaces, and home garages. Fort Worth runs on working concrete, and working concrete needs a coating that actually holds.
Every job starts with industrial diamond grinding — our 25-inch planetary machine covers about 500 sq ft per hour, so warehouse square footage is routine, not a stretch. 100%-solids epoxy, UV-stable topcoat, 10-year warranty.
✓ Warehouse Scale
✓ Forklift-Rated
✓ 10-Year Warranty
✓ Diamond-Grind Prep
Epoxy Systems We Install in Fort Worth
Three professional-grade systems, all built on 100%-solids epoxy and a properly ground slab. What changes is the finish, not the durability.
- Flake Epoxy — full-broadcast vinyl flake, sealed with polyaspartic. Slip-resistant, hides wear and tire marks, mops clean. The default for warehouses, service bays, and garages.
- Stone Epoxy — decorative quartz aggregate, natural stone texture with real grip. The pick for patios, pool decks, and covered outdoor concrete.
- Metallic Epoxy — swirling pigments in clear epoxy. High-gloss, one of a kind. Where the floor is part of how the space sells — showrooms, retail, upscale garages.
Built for the Floors Fort Worth Actually Has
Warehouse Floors
Distribution space, storage, light manufacturing. Our planetary grinder covers roughly 500 sq ft per hour, so square footage that would stall a smaller outfit is just a schedule for us.
Forklift & Pallet Jack Rated
100%-solids epoxy on a properly ground slab takes forklift traffic and loaded racking. What fails under a forklift is a coating over unprepped concrete — the bond gives out and it lifts in sheets.
Chemical & Oil Resistant
Hydraulic fluid, motor oil, solvents, battery acid from a lift truck. A sealed, non-porous floor holds them on the surface instead of drinking them in and keeping the stain permanently.
Brighter Workspace
A light epoxy floor reflects overhead light through the whole building. In a warehouse or a service bay that's a real safety and productivity difference, not a cosmetic one.
Scheduled Around You
We can section a large floor and phase the work so your operation keeps running. Nights and weekends where it makes sense. Downtime is a cost — we treat it like one.
Home Garages Too
Same equipment, same 100%-solids epoxy, same 10-year warranty — just a smaller floor. Most Fort Worth garages are ground, repaired, coated, and topcoated in a single day.
Our Epoxy Flooring Installation Process in Fort Worth
Step 1: Free Estimate
We come out, measure, inspect the slab, and talk through how the space gets used — traffic, loads, chemicals, hours. Then a transparent written quote.
Step 2: Diamond Grinding
Industrial planetary grinders strip old coatings and sealers and profile the bare concrete to a uniform CSP. Dust-controlled with vacuum extraction. Learn more about our grinding process.
Step 3: Crack & Spall Repair
Cracks, divots, joint damage, forklift chips — filled and repaired before any coating goes down. On a working floor this is most of the job.
Step 4: Base Coat
A 100%-solids epoxy base coat is applied to the prepped surface. No water-based fillers — they're cheaper, and they're why coatings fail in Texas heat.
Step 5: Flake / Stone / Metallic
Your chosen material is broadcast into the wet base coat to full saturation. Slip-resistance and appearance are both dialed here.
Step 6: Polyaspartic Topcoat
A UV-stable polyaspartic topcoat seals and protects the floor. Walk on it in 24 hours, drive on it in 48.
Industrial Concrete Grinding — Also Available on Its Own
Every floor we coat in Fort Worth starts with diamond grinding — never acid etching. On warehouse-scale concrete this is not a preference, it's the whole ballgame: the larger the slab, the more inconsistent an etched surface becomes, and the faster a coating starts lifting in patches under traffic. Our planetary grinder produces a uniform CSP edge to edge. We also take on grinding-only work — including subcontract prep for flooring contractors and builders across the Fort Worth area, at wholesale per-square-foot rates.
Concrete Grinding & Subcontract Prep
Standalone service from $350
Serving Fort Worth & All of DFW
We cover all of Fort Worth — the Stockyards, downtown, the Alliance corridor, Meacham, the Near Southside, and the residential neighborhoods across the city. Fort Worth anchors the western half of the metroplex, and we work the whole thing: Arlington, Keller, Grapevine, Roanoke, Grand Prairie, and east to Dallas. No travel fees across our service area.
Allen
Anna
Arlington
Aubrey
Carrollton
Celina
Dallas
Denton
Flower Mound
Fort Worth
Frisco
Garland
Grand Prairie
Grapevine
Irving
Keller
Lewisville
Little Elm
McKinney
Melissa
Mesquite
Oak Point
Plano
Prosper
Richardson
Roanoke
Wylie
Why Choose EPOXY Flooring by NovaRiver LLC in Fort Worth?
- Industrial-grade equipment — 25-inch planetary grinder, ~500 sq ft per hour.
- Our own crew every time — no subcontractors, same team start to finish.
- We work around your operation — phased sections, nights, weekends where it makes sense.
- 100%-solids epoxy only — no water-based systems that fail under load and heat.
- Diamond grinding included — on every single job, no exceptions.
- Subcontract prep available — wholesale grinding for contractors and builders.
- 10-year warranty — if your floor fails, we fix it. Period.
FAQ — Epoxy Flooring Fort Worth TX
Common questions from Fort Worth property and business owners.
Residential garage projects range from $3 to $7 per sq ft installed — a standard 2-car garage typically runs $1,400–$2,800. Warehouse and commercial floors are quoted by square footage, and the per-foot rate drops as the area grows. Send us the square footage and we'll give you a number.
Yes, when the prep is done right. A 100%-solids epoxy system bonded to a properly ground slab handles forklifts, pallet jacks, and loaded racking. What fails under forklift traffic is a coating applied over an unprepped or acid-etched floor — the bond gives out and the coating lifts in sheets. Mechanical grinding is what prevents that.
Our 25-inch planetary grinder covers roughly 500 sq ft per hour, so warehouse-scale square footage is routine. For very large or phased projects we schedule around your operation — we can section the floor so you keep running while we work.
Yes. We provide contract diamond grinding and surface prep as a subcontractor for flooring installers, epoxy contractors, and commercial builders across the Fort Worth area. Wholesale per-square-foot rates and CSP-ready surfaces so your coating goes down right the first time.
All of Fort Worth — the Stockyards, downtown, the Alliance corridor, Meacham, the Near Southside, and the residential neighborhoods across the city. We also serve the wider Tarrant County area including Arlington, Keller, Grapevine, and Roanoke. No travel fees within our service area.
Ready for a New Floor in Fort Worth, TX?
Free on-site estimates · Warehouse, commercial & residential · No obligation
Warehouse & Industrial
Send the square footage and how the floor gets used. Forklifts, racking, chemicals, hours of operation — all of it changes the spec.
Contractors: Subcontract Prep
Need a grinding sub in Fort Worth? Wholesale per-square-foot rates, CSP-ready surfaces, dependable scheduling.
10-Year Warranty
Every floor we install in Fort Worth is backed by our 10-year warranty. If it fails, we fix it — no questions asked.