Epoxy Flooring in Irving, TX
Looking for professional epoxy flooring in Irving, TX? EPOXY Flooring by NovaRiver LLC installs flake, stone, and metallic epoxy systems that stand up to the stuff that ruins ordinary floors — oil, coolant, brake fluid, solvents, road salt.
Bare concrete drinks every drip and keeps the stain forever. A sealed diamond-ground epoxy floor holds it on the surface, where it wipes right off. That's why it's the right floor for a working garage or an auto shop — and why it looks new years after concrete would be a map of every spill. 10-year warranty.
✓ Chemical-Resistant
✓ Oil & Stain Proof
✓ 10-Year Warranty
✓ Diamond-Grind Prep
What It Shrugs Off
The everyday chemistry of a garage or shop floor. All of this sits on top of a sealed epoxy surface and wipes away instead of soaking in.
Motor oil
Transmission fluid
Brake fluid
Coolant / antifreeze
Gasoline
Most solvents
Road salt
Degreasers
Household chemicals
The honest exceptions: strong acids and a few aggressive industrial solvents left to pool can etch the topcoat over time. For those, wipe promptly. For everything a normal garage or shop throws at a floor, there's nothing here you need to worry about.
Why Porous Concrete Loses
The problem with bare concrete isn't strength. It's that it's a sponge. Every oil drip, every coolant spill, every bit of brake fluid soaks down into the surface — and once it's in, it's in. No amount of scrubbing pulls it back out.
Over a few years a working garage floor becomes a permanent record of everything that ever leaked on it. Stains you can't clean, a surface that smells like a shop, dust coming up every time you sweep.
Epoxy closes the concrete off entirely. The floor becomes a non-porous, sealed surface — nothing penetrates, nothing stains, nothing stays. That's the whole mechanism, and it's why a coated floor still looks new when the bare one next door is unreadable.
Where It Earns Its Keep in Irving
Home Garages
The daily reality: oil drips, a leaking transmission, salt tracked in off winter roads. All of it wipes off a sealed floor. This is the number one reason Irving homeowners coat a garage.
Auto & Mechanic Shops
Constant oil, coolant, and solvent exposure, jack stands, rolling toolboxes, hot tires. Epoxy handles the chemical and mechanical abuse that turns a shop's bare slab into a hazard.
Light Industrial & Las Colinas
Warehouses, service areas, back-of-house at commercial properties. A chemical-resistant floor that also passes a visual inspection when a client walks through.
Built for Texas Heat
The UV-stable polyaspartic topcoat won't yellow, peel, or bubble through North Texas summers, and shrugs off hot tire pickup that lifts lesser coatings.
Fast Cleanup
End of the day, a mechanic's floor goes from disaster to done in minutes. Seamless and non-porous means no scrubbing stains that were never coming out anyway.
10–20 Year Durability
Chemical resistance is only useful if the floor stays down. On a diamond-ground slab, epoxy bonds permanently and lasts decades — backed by our 10-year warranty.
Epoxy Systems We Install in Irving
All three are 100%-solids epoxy under a UV-stable topcoat, and all three carry the same chemical resistance. The choice is look and setting.
- Flake Epoxy — full-broadcast vinyl flake sealed with polyaspartic. Slip-resistant, hides wear and tire marks. The default for garages and shops.
- Stone Epoxy — decorative quartz aggregate, natural stone texture, real traction wet or dry. Ideal for pool decks, patios, and covered outdoor concrete.
- Metallic Epoxy — swirling pigments in clear epoxy. The showpiece finish for showrooms, dealership floors, and upscale garages.
Our Epoxy Flooring Installation Process in Irving
Step 1: Free Estimate
We measure, inspect the concrete, and ask what the floor deals with — daily driver, project cars, or a working shop. Then a written quote.
Step 2: Diamond Grinding
Industrial grinders profile the concrete and strip old coatings and oil-soaked surface layers. Included every job. Learn more about our grinding process.
Step 3: Crack & Spall Repair
Cracks, divots, and old oil-stain pits are filled and repaired before any coating goes down.
Step 4: Base Coat
100%-solids epoxy rolled onto the prepped surface. This is the layer that delivers the chemical resistance — not the thin water-based stuff in a box kit.
Step 5: Flake / Stone / Metallic
Your chosen material broadcast into the wet base coat to full saturation, then scraped back even.
Step 6: Polyaspartic Topcoat
The UV-stable topcoat seals it and adds the outer chemical- and abrasion-resistant layer. Walk on it in 24 hours, drive on it in 48.
Chemical Resistance Is Useless If the Floor Lifts
An oil-proof coating that peels off the slab isn't oil-proof — it's just oil-proof debris on your garage floor. The resistance only counts while the epoxy stays bonded, and that bond comes from diamond grinding, never acid etching. This matters double on a shop or garage slab that's already soaked in oil: grinding removes the contaminated surface layer so the new coating bonds to clean concrete instead of a greasy film. We grind every floor. Grinding is also available as a standalone service from $350.
Learn About Concrete Grinding
Standalone service from $350
Serving Irving & All of DFW
We cover all of Irving — Las Colinas, Valley Ranch, South Irving, and the areas near DFW Airport and the Toyota Music Factory. Home garages, auto shops, and commercial floors alike. We also serve neighboring Coppell, Grand Prairie, Grapevine, and the full metroplex east to Dallas. No travel fees across our service area.
Allen
Anna
Arlington
Aubrey
Carrollton
Celina
Dallas
Denton
Flower Mound
Fort Worth
Frisco
Garland
Grand Prairie
Grapevine
Irving
Keller
Lewisville
Little Elm
McKinney
Melissa
Mesquite
Oak Point
Plano
Prosper
Richardson
Roanoke
Wylie
Why Choose EPOXY Flooring by NovaRiver LLC in Irving?
- 100%-solids epoxy only — the resin that delivers real chemical resistance, not water-based paint.
- Our own crew every time — no subcontractors, same team start to finish.
- Diamond grinding included — strips oil-soaked surface layers so the coating bonds to clean concrete.
- Residential & commercial — garages, auto shops, light industrial, showrooms.
- Locally owned & operated — based in DFW, not a national franchise.
- 10-year warranty — if your floor fails, we fix it. Period.
FAQ — Epoxy Flooring Irving TX
Common questions from Irving homeowners and shop owners about chemical resistance and durability.
A 100%-solids epoxy floor under a polyaspartic topcoat resists motor oil, transmission and brake fluid, coolant, gasoline, most solvents, road salt, and household chemicals. These sit on the surface and wipe off. The exceptions are strong acids and a few aggressive industrial solvents left to sit — for those, wipe promptly. For most garages and shops, nothing you use day to day will hurt the floor.
Not a sealed epoxy floor. Bare concrete is porous — oil soaks straight in and the stain is permanent. Epoxy is non-porous, so a drip sits on top until you wipe it, and it leaves nothing behind. This is the single most common reason people in Irving coat a garage that's already stained beyond cleaning.
Yes — it's one of the best surfaces for it. It handles oil, coolant, and solvent exposure, takes jack stands and rolling toolboxes, resists hot tire pickup, and cleans up fast at the end of the day. On a properly ground slab it holds up to the daily chemical and mechanical abuse that destroys bare concrete.
Residential garage projects range from $3 to $7 per sq ft installed — a standard 2-car garage runs $1,400–$2,800. Commercial and shop floors are quoted by square footage. Free on-site estimates, no obligation.
All of Irving — Las Colinas, Valley Ranch, South Irving, and the areas near DFW Airport and the Toyota Music Factory. We handle residential garages, auto shops, and commercial floors, and also serve neighboring Coppell, Grand Prairie, Grapevine, and Dallas. No travel fees within our service area.
Ready for a Floor That Handles the Mess?
Free on-site estimates · Garages, shops & commercial · No obligation
Oil, Coolant, Solvents — Handled
Sealed and non-porous. Spills wipe off instead of staining. The floor for a working garage or an auto shop.
Dallas County Coverage
Irving, Coppell, Grand Prairie, Grapevine — plus the full DFW metroplex, with no travel fees.
10-Year Warranty
Every floor we install in Irving is backed by our 10-year warranty. If it fails, we fix it — no questions asked.