Epoxy Flooring in Flower Mound, TX
Looking for professional epoxy flooring in Flower Mound, TX? EPOXY Flooring by NovaRiver LLC installs flake, stone, and metallic epoxy systems across Flower Mound — and in this town, the garage is rarely just a garage. It's the gym. The workshop. Where the project car lives. Where people actually spend time.
A raw concrete slab undercuts all of that. It stains, it dusts, it cracks, and it makes a finished space feel unfinished. Every job starts with diamond-grind surface prep and ends with a UV-stable polyaspartic topcoat, backed by our 10-year warranty. Our own crew, start to finish.
✓ 10-Year Warranty
✓ Gyms, Shops & Man Caves
✓ Free Estimate
✓ Diamond-Grind Prep
Epoxy Systems We Install in Flower Mound
Three professional-grade systems. Which one fits depends less on your budget than on what the space is actually for.
- Flake Epoxy — full-broadcast vinyl flake over 100%-solids epoxy. Textured, slip-resistant, hides dust and wear. The right call for a working garage, a home gym, or anywhere with real traffic.
- Stone Epoxy — decorative quartz aggregate, natural stone texture. Excellent grip wet or dry, which makes it the pick for pool decks, patios, and covered outdoor space.
- Metallic Epoxy — swirling pigments in clear epoxy, mixed to your palette. High-gloss, three-dimensional, genuinely one of a kind. This is the showroom-garage floor.
What Flower Mound Homeowners Use It For
Home Gyms
Dropped weights, rack loads, rubber mats sliding around. Epoxy takes the abuse without cracking, and sweat and spilled water wipe up instead of soaking into porous concrete. The flake texture gives traction — not a slick floor you have to think about mid-set.
Collector & Project Cars
The UV-stable topcoat prevents hot tire pickup — the failure that lifts cheap coatings right where the tires sit. Jack stands, lifts, oil drips: all handled. Installing a lift? Tell us at the estimate so we can plan around the post locations.
Workshops
Sawdust sweeps instead of grinding into the slab. Dropped tools don't chip it. Solvents, glue, and stain wipe off a sealed surface rather than becoming permanent features of the floor.
Man Caves & Hangouts
If the garage door goes up on game day and people are standing around in there, the floor is part of the room. Metallic epoxy in particular turns a slab into something worth looking at.
No More Concrete Dust
Bare concrete sheds fine dust constantly — onto your tools, your car, whatever's stored in there. A sealed floor stops it. This alone is why a lot of people finally make the call.
Finished, Not Raw
In a market where buyers walk through a lot of comparable homes, a finished garage reads as a completed space. It's one of the few upgrades that costs a fraction of what it looks like it cost.
Our Epoxy Flooring Installation Process in Flower Mound
Step 1: Free Estimate
We visit your Flower Mound home, measure the floor, inspect the concrete, and talk through what the space is actually for. That changes the recommendation more than anything else.
Step 2: Diamond Grinding
Industrial grinders mechanically profile the concrete. Included on every job — it's what makes epoxy bond permanently instead of peeling. Learn more about our grinding process.
Step 3: Crack & Spall Repair
Cracks, divots, and control joints are addressed before any coating goes down, so the finished floor reads clean from wall to wall.
Step 4: Base Coat
A 100%-solids epoxy base coat is rolled onto the prepped surface. No water-based fillers — just high-performance resin engineered for Texas conditions.
Step 5: Flake / Stone / Metallic
Your chosen material goes into the wet base coat to full saturation. Color, chip size, and broadcast density are dialed to what you picked.
Step 6: Polyaspartic Topcoat
A UV-stable polyaspartic topcoat seals and protects the floor. Walk on it in 24 hours, drive on it in 48.
Concrete Grinding — The Step That Makes It Last
Every epoxy floor we install in Flower Mound starts with diamond concrete grinding — never acid etching, never shortcuts. This is the part nobody sees and the part that decides everything. Etching leaves a chemical-only bond, and within a year the coating starts lifting — usually right where a tire sits, or under a squat rack. Grinding opens the concrete pores and creates a uniform CSP so the epoxy locks in mechanically. That's the whole reason a 10-year warranty is possible. Grinding is also available as a standalone service from $350.
Learn About Concrete Grinding
Standalone service from $350
Serving Flower Mound & All of DFW
We cover all of Flower Mound — Bridlewood, Wellington, Canyon Falls, the Highlands, Lakeside, and the neighborhoods around The Mound itself. We also work neighboring Lewisville, Highland Village, Grapevine, and Coppell, and the wider Denton County area including Denton and Carrollton — plus the full metroplex down to Dallas and Fort Worth. No travel fees.
Allen
Anna
Arlington
Aubrey
Carrollton
Celina
Dallas
Denton
Flower Mound
Fort Worth
Frisco
Garland
Grand Prairie
Grapevine
Irving
Keller
Lewisville
Little Elm
McKinney
Melissa
Mesquite
Oak Point
Plano
Prosper
Richardson
Roanoke
Wylie
Why Choose EPOXY Flooring by NovaRiver LLC in Flower Mound?
- Locally owned & operated — based in DFW, not a national franchise.
- Our own crew every time — no subcontractors, same team start to finish.
- We ask what the space is for — a gym floor and a showroom floor are not the same spec.
- 100%-solids epoxy only — no water-based systems that fail in Texas heat.
- Diamond grinding included — on every single job, no exceptions.
- 10-year warranty — if your floor fails, we fix it. Period.
- Residential & commercial — garages, gyms, workshops, patios, showrooms.
FAQ — Epoxy Flooring Flower Mound TX
Common questions from Flower Mound homeowners before booking their epoxy floor installation.
Most Flower Mound epoxy projects range from $3 to $7 per sq ft installed. A 2-car garage typically runs $1,400–$2,800. Three-car and oversized garages are quoted by square footage. Free on-site estimates, no obligation.
Yes, and it's one of the most common reasons people call us. Epoxy handles dropped weights, rack loads, and rubber mat traffic without cracking or staining. The seamless surface means sweat and spilled water wipe up instead of soaking into porous concrete, and the flake texture gives you traction rather than a slick gym floor.
Yes. 100%-solids epoxy under a polyaspartic topcoat handles vehicle loads and jack stands, and the UV-stable topcoat prevents hot tire pickup — the failure that lifts cheap coatings right where the tires sit. If you're installing a lift, tell us at the estimate so we can plan the layout around the post locations.
It's a visible finish upgrade in a market where buyers tour a lot of comparable homes. A finished garage floor reads as a completed space rather than raw slab — and unlike most upgrades, it costs a fraction of what it looks like it cost.
All of Flower Mound — Bridlewood, Wellington, Canyon Falls, the Highlands, Lakeside, and the neighborhoods around The Mound. We also serve neighboring Lewisville, Highland Village, Grapevine, and Coppell. No travel fees within our service area.
Ready to Finish Your Flower Mound Garage?
Free on-site estimates · Usually available within 48 hours · No obligation
Tell Us What It's For
Gym, workshop, showroom, or just a garage that stops making dust — the answer changes the spec. Mention it when you text.
Denton County Coverage
Flower Mound, Lewisville, Highland Village, Grapevine, Coppell — plus the full DFW metroplex, no travel fees.
10-Year Warranty
Every floor we install in Flower Mound is backed by our 10-year warranty. If it fails, we fix it — no questions asked.